Why Do Circuit Breaks Trip?

Why Do Circuit Breaks Trip?

Circuit breakers are made to protect electrical circuit from damages caused by short circuits or overloads. Once a circuit breaker trip, you can reset it whether manually or automatically to resume its normal function. Many refer to circuit breakers as a simple solution to a serious problem.

The advantage of circuit breakers over a fuse is the fact that it can be reset and used for a long time. The fuse on the other hand blows and you will not be able to use it again. When this happens you have to get a new one to replace it.

The ‘trip, is automatically executed by circuit breakers when they find a fault condition or when excessive heat happens. When too much current flows through them, they simply cut the power and waits for someone to check or fix the problem. These prevent accidents from fires or other possible scenarios caused by failure of equipment.

Circuit breakers handle different levels of voltage. The circuit breaker you should use must be within the boundary of your voltage consumption. Voltage is known as the pressure that electric charges make. The current is the flow of the voltage towards the different wires that uses electricity. The breaker offers resistance when there are fluctuations of voltage in the current. The ‘trip, happens when these fluctuations happens and cuts the flow of power.

When a fuse blow, you will notice that the metal pieces that transfers electricity has melted. This is due to ‘excessive heat,. The breaker on the other hands only goes to its neutral position and you can easily turn it back on. But before that, you have to wait for a few minutes to let it ‘cool down,. If you turn it on right away and you don’t see the immediate effects, the main reason is because it is still too hot.

Post Comment